Raspberry Pi for drone and car
I am looking for something to hang below my drone which needs to be able to run off a battery pack for an hour.
So something like a raspberry pi might work? What do you think?
It would need to have a wifi chip capable of an external antenna and a gps chip.
For the most part it will be in my car running direct off the battery via a 12-5v converter? and I am going to install this antenna on it
https://www.gowifi.co.nz/omni/ant-31.html
I just need to know what model of raspberry pi type device, operating system, scanning software, gps module and wifi module do you recommend?
So something like a raspberry pi might work? What do you think?
It would need to have a wifi chip capable of an external antenna and a gps chip.
For the most part it will be in my car running direct off the battery via a 12-5v converter? and I am going to install this antenna on it
https://www.gowifi.co.nz/omni/ant-31.html
I just need to know what model of raspberry pi type device, operating system, scanning software, gps module and wifi module do you recommend?
you can search these forums for various Pi-based projects including instructions and equipment; there's a dizzying variety.
I know folks like Aardvaark have also successfully used "headless" Android devices for drone stumbling as well.
I know folks like Aardvaark have also successfully used "headless" Android devices for drone stumbling as well.
you may want to look here: viewtopic.php?f=3&t=1916&p=10271#p10271
its the rpi setup that i use, with details how to build it here: https://www.designer2k2.at/de/mods/elek ... ving-setup
and here: https://github.com/designer2k2/warpi
its the rpi setup that i use, with details how to build it here: https://www.designer2k2.at/de/mods/elek ... ving-setup
and here: https://github.com/designer2k2/warpi
I might make a Python script. Right now i can only test it with a rpi 3b+ and 5 (rpi4 will probably work too). It should be pretty easy as the csv format is simple as described here: [url]https://api.wigle.net/csvFormat.html/url] and it could be uploaded via api. So stay tuned
Return to “Net Hugging Hardware and Software”
Who is online
Users browsing this forum: No registered users and 5 guests