Kismet v2016 Has 5 GHz?
I have a Raspberry Pi 2 that I've installed version 2016 on. I can get it to work, however I can't seem to get any 5 GHz signals. Anybody know where I can chase this up to get it to work? I have no clue what is going wrong. I'm under the assumption it should work fine.
The antenna is a Antenna chip: Ralink 5370, MTK760, which has 5 GHz capabilities. It is SIMILAR to this unit:
https://www.walmart.ca/en/ip/USB-WiFi-A ... L05V8UFKHV
Everything seems legit, but I can't seem to find any 5 GHz channels. Also, the channellist entries in kismet.conf don't contain any 802.11n (5 GHz) channels. Not sure why this is the case. I've not read anything with regards to manually entering them.
Here is my kismet.conf:
The antenna is a Antenna chip: Ralink 5370, MTK760, which has 5 GHz capabilities. It is SIMILAR to this unit:
https://www.walmart.ca/en/ip/USB-WiFi-A ... L05V8UFKHV
Everything seems legit, but I can't seem to find any 5 GHz channels. Also, the channellist entries in kismet.conf don't contain any 802.11n (5 GHz) channels. Not sure why this is the case. I've not read anything with regards to manually entering them.
Here is my kismet.conf:
Code: Select all
version=2009-newcore
allowplugins=false # RF orig set to true
preferredchannels=1,6,11
channelvelocity=5
channellist=IEEE80211b:1:3,6:3,11:3,2,7,3,8,4,9,5,10
channellist=IEEE80211a:36,40,44,48,52,56,60,64,149,153,157,161,165
channellist=IEEE80211ab:1:3,6:3,11:3,2,7,3,8,4,9,5,10,36,40,44,48,52,56,60,64,149,153,157,161,165
listen=tcp://127.0.0.1:2501
allowedhosts=127.0.0.1,192.168.1.4
maxclients=5
maxbacklog=5000
ouifile=/etc/manuf
ouifile=/usr/share/wireshark/wireshark/manuf
ouifile=/usr/share/wireshark/manuf
ouifile=/Applications/Wireshark.app/Contents/Resources/share/wireshark/manuf
gps=false # RF
gpstype=gpsd
gpshost=localhost:2947
gpsmodelock=false
gpsreconnect=true
tuntap_export=false
tuntap_device=kistap0
alert=ADHOCCONFLICT,5/min,1/sec
alert=AIRJACKSSID,5/min,1/sec
alert=APSPOOF,10/min,1/sec
alert=BCASTDISCON,5/min,2/sec
alert=BSSTIMESTAMP,5/min,1/sec
alert=CHANCHANGE,5/min,1/sec
alert=CRYPTODROP,5/min,1/sec
alert=DISASSOCTRAFFIC,10/min,1/sec
alert=DEAUTHFLOOD,5/min,2/sec
alert=DEAUTHCODEINVALID,5/min,1/sec
alert=DISCONCODEINVALID,5/min,1/sec
alert=DHCPNAMECHANGE,5/min,1/sec
alert=DHCPOSCHANGE,5/min,1/sec
alert=DHCPCLIENTID,5/min,1/sec
alert=DHCPCONFLICT,10/min,1/sec
alert=NETSTUMBLER,5/min,1/sec
alert=LUCENTTEST,5/min,1/sec
alert=LONGSSID,5/min,1/sec
alert=MSFBCOMSSID,5/min,1/sec
alert=MSFDLINKRATE,5/min,1/sec
alert=MSFNETGEARBEACON,5/min,1/sec
alert=NULLPROBERESP,5/min,1/sec
apspoof=Foo1:ssidregex="(?i:foobar)",validmacs=00:11:22:33:44:55
apspoof=Foo2:ssid="Foobar",validmacs="00:11:22:33:44:55,aa:bb:cc:dd:ee:ff"
allowkeytransmit=true
writeinterval=300
enablesound=false
soundbin=play
sound=newnet,true
sound=newcryptnet,true
sound=packet,true
sound=gpslock,true
sound=gpslost,true
sound=alert,true
enablespeech=false
speechbin=flite
speechtype=raw
speechencoding=nato
speech=new,"New network detected s.s.i.d. %1 channel %2"
speech=alert,"Alert %1"
speech=gpslost,"G.P.S. signal lost"
speech=gpslock,"G.P.S. signal O.K."
alertbacklog=50
logtypes=pcapdump,gpsxml,netxml,nettxt,alert
pcapdumpformat=ppi
logdefault=Kismet
logtemplate=%p%n-%D-%t-%i.%l
configdir=%h/.kismet/
Seems the antenna I was sold didn't have 5 GHz.
Closed.
Closed.
Return to “Net Hugging Hardware and Software”
Who is online
Users browsing this forum: No registered users and 7 guests